stdClass Object
(
[section_item_id] => 7387
[section_id] => 608
[item_id] => 10061
[item_order] => 1
[item_type] => lp_lesson
[ID] => 10061
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Solidworks arayüzü ve modülleri
Options ayarları
Customize ayarları
Çalışma sayfası oluşturma
Add-Ins
[post_title] => SolidWorks 2017 Arayüz
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => solidworks-2017-arayuz
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:09:24
[post_modified_gmt] => 2018-02-03 11:09:24
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/solidworks-2017-arayuz/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7388
[section_id] => 608
[item_id] => 10062
[item_order] => 2
[item_type] => lp_lesson
[ID] => 10062
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Genel kuralları
2 Boyut çizim komutları
Ölçülendirmeler (Dimensions)
İlişkilendirmeler (Relations)
Make/İnsert BLOCK
2D Hareketlendirme
Equations ve formüllerle çalışma
Sketch Picture
Teknik çizim uygulamaları
[post_title] => Sketch
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => sketch
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:17:05
[post_modified_gmt] => 2018-02-03 11:17:05
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/sketch/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7389
[section_id] => 608
[item_id] => 10063
[item_order] => 3
[item_type] => lp_lesson
[ID] => 10063
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Features menüsü
Model üzerinde parametrik düzenlemeler
Reference Geometry
Malzeme atama,ekleme ve ağırlık hesapları
Unsun ağacı işlem önceliği teknikleri
Katı model uygulamaları
[post_title] => Katı Modelleme (Part Design)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => kati-modelleme-part-design
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:16:55
[post_modified_gmt] => 2018-02-03 11:16:55
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/kati-modelleme-part-design/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7390
[section_id] => 608
[item_id] => 10064
[item_order] => 4
[item_type] => lp_lesson
[ID] => 10064
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => İleri Features menüsü
İleri Edit Seçenekleri
Çok Gövdeli Katılarda Çalışma
İleri Düzey Uygulamalar
[post_title] => İleri Katı Modelleme
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => ileri-kati-modelleme
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:16:38
[post_modified_gmt] => 2018-02-03 11:16:38
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/ileri-kati-modelleme/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7391
[section_id] => 608
[item_id] => 10065
[item_order] => 5
[item_type] => lp_lesson
[ID] => 10065
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Yüzey modellemeye giriş
Surfaces modülü
Yüzey modeli katıya çevirme teknikleri
Katı model üzerinde yüzey komutlarını kullanma
Yüzey modelleme uygulamaları
[post_title] => Yüzey Modelleme (Surfaces)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => yuzey-modelleme-surfaces
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:16:21
[post_modified_gmt] => 2018-02-03 11:16:21
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/yuzey-modelleme-surfaces/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7392
[section_id] => 608
[item_id] => 10066
[item_order] => 6
[item_type] => lp_lesson
[ID] => 10066
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Nurbs modelleme mantığı
Subdivision yüzeylerde çalışma
Serbest formlu ve organik yüzeyler
A sınıfı yüzeyler oluşturma
Otomotiv yüzeyi oluşturma uygulamas
[post_title] => İleri Yüzey Modelleme (Power Surfaces)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => ileri-yuzey-modelleme-power-surfaces
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:15:40
[post_modified_gmt] => 2018-02-03 11:15:40
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/ileri-yuzey-modelleme-power-surfaces/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7393
[section_id] => 608
[item_id] => 10067
[item_order] => 7
[item_type] => lp_lesson
[ID] => 10067
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Sheet Metal modülü
Oluşturulan sac metaller üzerinde parametrik
değişiklikler yapma
Forming Tool
Açılım alma
Sac metal uygulamaları
[post_title] => Sac Parça Tasarımı (Sheet Metal)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => sac-parca-tasarimi-sheet-metal
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:18:04
[post_modified_gmt] => 2018-02-03 11:18:04
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/sac-parca-tasarimi-sheet-metal/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7394
[section_id] => 608
[item_id] => 10068
[item_order] => 8
[item_type] => lp_lesson
[ID] => 10068
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Montaj ve Alt montaj oluşturulması
Standart,Advance,Mecanical mate uygulamaları
Montaj ortamında parça tasarlama (New Part)
Montaj ortamında parametrik düzenlemeler
Belt/Chain ile kayış ve zincir ekleme
Patlatma ve Toplama animasyonları
Custom properties mantığı
Lightweight ile montaj ortamında rahat çalışma
Toolbox ile kütüpaneden hazır parça çağırma
[post_title] => Montaj (Assambly)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => montaj-assambly
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:19:02
[post_modified_gmt] => 2018-02-03 11:19:02
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/montaj-assambly/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7395
[section_id] => 608
[item_id] => 10069
[item_order] => 9
[item_type] => lp_lesson
[ID] => 10069
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Motion Study ile animasyon hazırlama
İleri Toplanma Animasyonu
Yer çekimi ve kontak ilişkileri
Kamera,ışık ve sahne ekleyip sunum hazırlama
Kinematik Hareketler
Video Hazırlama
[post_title] => İleri Montaj ve Animasyon
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => ileri-montaj-ve-animasyon
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:19:51
[post_modified_gmt] => 2018-02-03 11:19:51
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/ileri-montaj-ve-animasyon/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7396
[section_id] => 608
[item_id] => 10070
[item_order] => 10
[item_type] => lp_lesson
[ID] => 10070
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Otomatik görünüş çıkarma
Kesit ve Detay alma yöntemleri
Teknik resim sembolleri
Link to Property mantığı
Kendi teknik resim sayfamızı hazırlama
[post_title] => Teknik Resim (Drawing)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => teknik-resim-drawing
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:20:47
[post_modified_gmt] => 2018-02-03 11:20:47
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/teknik-resim-drawing/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7397
[section_id] => 608
[item_id] => 10071
[item_order] => 11
[item_type] => lp_lesson
[ID] => 10071
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Mold tools menüsü
Kalıp çekirdeklerinin oluşturulması
Yolluk oluşturma
Oluşturulan kalıbın animasyonunun hazırlanması
Cavity / Join ile erkek ve dişi oluşturma
[post_title] => Kalıp Tasarımı (Mold Design)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => kalip-tasarimi-mold-design
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:21:40
[post_modified_gmt] => 2018-02-03 11:21:40
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/kalip-tasarimi-mold-design/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7398
[section_id] => 608
[item_id] => 10072
[item_order] => 12
[item_type] => lp_lesson
[ID] => 10072
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Weldmen modülü
3D Sketch ile profil iskeleti oluşturma
Structural member ile hazır profil atama
Profil oluşturma
Kaynak atama
[post_title] => Kaynak ve Profiller (Weldment)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => kaynak-ve-profiller-weldment
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:22:23
[post_modified_gmt] => 2018-02-03 11:22:23
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/kaynak-ve-profiller-weldment/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7399
[section_id] => 608
[item_id] => 10073
[item_order] => 13
[item_type] => lp_lesson
[ID] => 10073
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Isı transferi analizi
Statik analiz
Frekans analizi
Burkulma analizi
Optimizasyon analizi
[post_title] => SolidWorks Simulation (Statik Analiz)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => solidworks-simulation-statik-analiz
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:23:12
[post_modified_gmt] => 2018-02-03 11:23:12
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/solidworks-simulation-statik-analiz/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7400
[section_id] => 608
[item_id] => 10074
[item_order] => 14
[item_type] => lp_lesson
[ID] => 10074
[post_author] => 1
[post_date] => 2018-02-03 10:40:39
[post_date_gmt] => 2018-02-03 10:40:39
[post_content] => Motor büyüklükleriyle oynama
Güç dağılımı belirleme
Bağlantıları planlama
Mekanizmalara sürtünme ekleme
Mekanizmanın siülasyonunu oluşturma
[post_title] => SolidWorks Motions (Dinamik Analiz)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => solidworks-motions-dinamik-analiz
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:24:30
[post_modified_gmt] => 2018-02-03 11:24:30
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/solidworks-motions-dinamik-analiz/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7401
[section_id] => 608
[item_id] => 10075
[item_order] => 15
[item_type] => lp_lesson
[ID] => 10075
[post_author] => 1
[post_date] => 2018-02-03 10:40:40
[post_date_gmt] => 2018-02-03 10:40:40
[post_content] => Zamana bağlı analiz
Mesh kontrolü
Sıcaklık ve Basın dağılımı kullanılarak
Sonlu elemanlar analizi
Sonuç analizleri
[post_title] => SolidWorks Flow Simulation (Akış Analizi)
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => solidworks-flow-simulation-akis-analizi
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:26:06
[post_modified_gmt] => 2018-02-03 11:26:06
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/solidworks-flow-simulation-akis-analizi/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7402
[section_id] => 608
[item_id] => 10076
[item_order] => 16
[item_type] => lp_lesson
[ID] => 10076
[post_author] => 1
[post_date] => 2018-02-03 10:40:40
[post_date_gmt] => 2018-02-03 10:40:40
[post_content] => Profesyonel render alma
Malzeme ve sahne atama
Render settings ayarları
[post_title] => Görselleştirme ve Render
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => gorsellestirme-ve-render
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:28:50
[post_modified_gmt] => 2018-02-03 11:28:50
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/gorsellestirme-ve-render/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
stdClass Object
(
[section_item_id] => 7403
[section_id] => 608
[item_id] => 10077
[item_order] => 17
[item_type] => lp_lesson
[ID] => 10077
[post_author] => 1
[post_date] => 2018-02-03 10:40:40
[post_date_gmt] => 2018-02-03 10:40:40
[post_content] => DXF veya DWG uzantılı 2 boyutlu çizimleri
Solidworks de açma
2 boyutlu çizimleri katı model haline getirme
2D to 3D uygulamaları
[post_title] => 2D to 3D
[post_excerpt] =>
[post_status] => publish
[comment_status] => open
[ping_status] => closed
[post_password] =>
[post_name] => 2d-to-3d
[to_ping] =>
[pinged] =>
[post_modified] => 2018-02-03 11:29:37
[post_modified_gmt] => 2018-02-03 11:29:37
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://www.ucuncubinyil.com/lessons/2d-to-3d/
[menu_order] => 0
[post_type] => lp_lesson
[post_mime_type] =>
[comment_count] => 0
)
Solidworks arayüzü ve modülleri
Options ayarları
Customize ayarları
Çalışma sayfası oluşturma
Add-Ins
Genel kuralları
2 Boyut çizim komutları
Ölçülendirmeler (Dimensions)
İlişkilendirmeler (Relations)
Make/İnsert BLOCK
2D Hareketlendirme
Equations ve formüllerle çalışma
Sketch Picture
Teknik çizim uygulamaları
Features menüsü
Model üzerinde parametrik düzenlemeler
Reference Geometry
Malzeme atama,ekleme ve ağırlık hesapları
Unsun ağacı işlem önceliği teknikleri
Katı model uygulamaları
İleri Features menüsü
İleri Edit Seçenekleri
Çok Gövdeli Katılarda Çalışma
İleri Düzey Uygulamalar
Yüzey modellemeye giriş
Surfaces modülü
Yüzey modeli katıya çevirme teknikleri
Katı model üzerinde yüzey komutlarını kullanma
Yüzey modelleme uygulamaları
Nurbs modelleme mantığı
Subdivision yüzeylerde çalışma
Serbest formlu ve organik yüzeyler
A sınıfı yüzeyler oluşturma
Otomotiv yüzeyi oluşturma uygulamas
Sheet Metal modülü
Oluşturulan sac metaller üzerinde parametrik
değişiklikler yapma
Forming Tool
Açılım alma
Sac metal uygulamaları
Montaj ve Alt montaj oluşturulması
Standart,Advance,Mecanical mate uygulamaları
Montaj ortamında parça tasarlama (New Part)
Montaj ortamında parametrik düzenlemeler
Belt/Chain ile kayış ve zincir ekleme
Patlatma ve Toplama animasyonları
Custom properties mantığı
Lightweight ile montaj ortamında rahat çalışma
Toolbox ile kütüpaneden hazır parça çağırma
Motion Study ile animasyon hazırlama
İleri Toplanma Animasyonu
Yer çekimi ve kontak ilişkileri
Kamera,ışık ve sahne ekleyip sunum hazırlama
Kinematik Hareketler
Video Hazırlama
Otomatik görünüş çıkarma
Kesit ve Detay alma yöntemleri
Teknik resim sembolleri
Link to Property mantığı
Kendi teknik resim sayfamızı hazırlama
Mold tools menüsü
Kalıp çekirdeklerinin oluşturulması
Yolluk oluşturma
Oluşturulan kalıbın animasyonunun hazırlanması
Cavity / Join ile erkek ve dişi oluşturma
Weldmen modülü
3D Sketch ile profil iskeleti oluşturma
Structural member ile hazır profil atama
Profil oluşturma
Kaynak atama
Isı transferi analizi
Statik analiz
Frekans analizi
Burkulma analizi
Optimizasyon analizi
Motor büyüklükleriyle oynama
Güç dağılımı belirleme
Bağlantıları planlama
Mekanizmalara sürtünme ekleme
Mekanizmanın siülasyonunu oluşturma
Zamana bağlı analiz
Mesh kontrolü
Sıcaklık ve Basın dağılımı kullanılarak
Sonlu elemanlar analizi
Sonuç analizleri
Profesyonel render alma
Malzeme ve sahne atama
Render settings ayarları
DXF veya DWG uzantılı 2 boyutlu çizimleri
Solidworks de açma
2 boyutlu çizimleri katı model haline getirme
2D to 3D uygulamaları
Solidworks arayüzü ve modülleri
Options ayarları
Customize ayarları
Çalışma sayfası oluşturma
Add-Ins
Genel kuralları
2 Boyut çizim komutları
Ölçülendirmeler (Dimensions)
İlişkilendirmeler (Relations)
Make/İnsert BLOCK
2D Hareketlendirme
Equations ve formüllerle çalışma
Sketch Picture
Teknik çizim uygulamaları
Features menüsü
Model üzerinde parametrik düzenlemeler
Reference Geometry
Malzeme atama,ekleme ve ağırlık hesapları
Unsun ağacı işlem önceliği teknikleri
Katı model uygulamaları
İleri Features menüsü
İleri Edit Seçenekleri
Çok Gövdeli Katılarda Çalışma
İleri Düzey Uygulamalar
Yüzey modellemeye giriş
Surfaces modülü
Yüzey modeli katıya çevirme teknikleri
Katı model üzerinde yüzey komutlarını kullanma
Yüzey modelleme uygulamaları
Nurbs modelleme mantığı
Subdivision yüzeylerde çalışma
Serbest formlu ve organik yüzeyler
A sınıfı yüzeyler oluşturma
Otomotiv yüzeyi oluşturma uygulamas
Sheet Metal modülü
Oluşturulan sac metaller üzerinde parametrik
değişiklikler yapma
Forming Tool
Açılım alma
Sac metal uygulamaları
Montaj ve Alt montaj oluşturulması
Standart,Advance,Mecanical mate uygulamaları
Montaj ortamında parça tasarlama (New Part)
Montaj ortamında parametrik düzenlemeler
Belt/Chain ile kayış ve zincir ekleme
Patlatma ve Toplama animasyonları
Custom properties mantığı
Lightweight ile montaj ortamında rahat çalışma
Toolbox ile kütüpaneden hazır parça çağırma
Motion Study ile animasyon hazırlama
İleri Toplanma Animasyonu
Yer çekimi ve kontak ilişkileri
Kamera,ışık ve sahne ekleyip sunum hazırlama
Kinematik Hareketler
Video Hazırlama
Otomatik görünüş çıkarma
Kesit ve Detay alma yöntemleri
Teknik resim sembolleri
Link to Property mantığı
Kendi teknik resim sayfamızı hazırlama
Mold tools menüsü
Kalıp çekirdeklerinin oluşturulması
Yolluk oluşturma
Oluşturulan kalıbın animasyonunun hazırlanması
Cavity / Join ile erkek ve dişi oluşturma
Weldmen modülü
3D Sketch ile profil iskeleti oluşturma
Structural member ile hazır profil atama
Profil oluşturma
Kaynak atama
Isı transferi analizi
Statik analiz
Frekans analizi
Burkulma analizi
Optimizasyon analizi
Motor büyüklükleriyle oynama
Güç dağılımı belirleme
Bağlantıları planlama
Mekanizmalara sürtünme ekleme
Mekanizmanın siülasyonunu oluşturma
Zamana bağlı analiz
Mesh kontrolü
Sıcaklık ve Basın dağılımı kullanılarak
Sonlu elemanlar analizi
Sonuç analizleri
Profesyonel render alma
Malzeme ve sahne atama
Render settings ayarları
DXF veya DWG uzantılı 2 boyutlu çizimleri
Solidworks de açma
2 boyutlu çizimleri katı model haline getirme
2D to 3D uygulamaları